Features
• Dual Port 10 Gb/s 10GBASE-T interface:
– 10GBASE-T IEEE 802.3an.
– 1000BASE-T IEEE 802.3ab.
– EEE on 10GBASE-T and 1000BASE-T.
– Auto sense mode.
– Detection and correction of pair swaps (MDI crossover), pair skew, and pair polarity.
– Auto-negotiation with next page support.
– IEEE fast retrain and link monitoring.
• x8 PCI Express 3.0 compliant.
• SR-IOV with up to 128 virtual functions (VFs).
• Function-Level Reset (FLR) support.
• TruFlow™ flow processing engine.
• Virtual Network Termination—XVXLAN, NVGRE, Geneve, GRE encap/decap.
• vSwitch Acceleration.
• Tunnel-aware stateless offloads.
• DCB support – PFC, ETS, QCN, DCBx.
• RDMA over Converged Ethernet (RoCE)
• Network Controller Sideband Interface (NC-SI).
• SMBus 2.0.
• MCTP over SMBus.
• PCIe-based UART and KCS.
• Jumbo frames up to 9 KB.
• Advanced congestion avoidance.
• Multiqueue, NetQueue, and VMQ.
• IPv4 and IPv6 offloads.
• TCP, UDP, and IP checksum offloads.
• Large send offload (LSO).
• Large receive offload (LRO).
• TCP segmentation offload (TSO).
• Receive-side scaling (RSS).
• Transmit-side scaling (TSS).
• VLAN insertion/removal.
• Interrupt coalescing.
• Network boot—PXE, UEFI.
• iSCSI boot.
• Wake-on-LAN (WOL).
• MSI and MSI-X.
• Conforms to the OCP 3.0 Design Specification Version 1.00.
Dual-Port 10GBASE-T Ethernet PCI Express 3.0 x8 OCP 3.0 Network Adapter Card
Item Dimension (L inchxW inchxH inch)
13 x 9 x 7
Weight
6.00 lb
Warranty Information
3 Years
Reviews
There are no reviews yet.