SIIG Accessory CE-H26P11-S1 1080p Wireless USB-C Video Hub Extender – 32ft Color Box


In stock

SKU: AS250999 Categories: ,

• Transmits HDMI video signals wirelessly from a USB-C enabled computer up to 32ft at Full HD 1080p resolution. Note: DisplayPort Alternate mode (DP Alt) signaling or Thunderbolt 3 technology is required through the USB-C port to pass video signal to the extender

• Supports HDMI/VGA dual video output simultaneously, and supports up to 1080p@60Hz resolution.

Note: HDMI and VGA outputs will show the same content, both will mirror each other

• Adds 2 USB 3.1 Type-A ports with data transmission up to 5Gbps. Connect more USB peripherals, such as flash drives, mouse, keyboards, printers, etc, to USB-C enabled computers

• Video signal auto-pairinge for extended or mirror screen configuration between the USB-C source device

• Supports simultaneous SD and MicroSD/TF memory card connection

• An ideal wireless USB 3.1 USB-C adapter hub for MacBook /MacBook Air, MacBook Pro with Thunderbolt 3 2020/2019/2018/2017, Surface Laptop 3, Surface go, iPad pro 2018/2019/2020, Lenove 720, Dell XPS, and many more USB-C DisplayPort Alternate or Thunderbolt 3 enabled computers

Compatibility Notes:
• DisplayPort Alternate mode (DP Alt) or Thunderbolt 3 enabled USB-C port is required for video output through the wireless hub extender

• The extender’s video outputs work in mirror mode, they will display the same content

• Requires USB power source of at least 5V/900mA
HDMI compatibility:
HDMI 1.3
1080p / 1080i / 720p / 480p
Wireless transmission distance:
1080 at 60Hz: Up to 32ft (10m) Line-of-sight
Note: The transmission distance will vary depending on building layout, electronic interference, walls and partitions, other environmental conditions, and may be much less than the maximum
Display mode:
Mirror, Extended
(Note: The wireless extenders video outputs support mirror mode, both outputs display the same content)
Audio format:
R/L stereo audio 2-ch
USB 3.1 Gen1 compliant
USB data transfer rate:
Up to 5Gbps
SD and MicroSD/TF card reader:
Transfer rate: Up to 104Mbps
Storage capacity: 2TB
Transmitting unit (TX):
1x 24-pin USB-C, Male, Source device connection
2x 9-pin USB 3.0 Type-A, Female, Input
1x SD Card Reader, Female, Input
1x TF (Micro SD) Card Reader, Input
1x Button, Device pairing
Receiving unit (RX):
1x 19-pin HDMI Type-A, Female, Output
1x 15-pin D-Sub VGA, Female, Output
1x 3.5 mm Audio, Output
1x 24-pin, USB-C, DC power, Input
1x Button, Device pairing
Environmental conditions:
Operating temperature: 32 to 122 degrees F
Storage temperature: 14 to 140 degrees F
Relative humidity: 5% to 90% RH (non-condensing)
Country of origin:
System Requirements
USB-C DisplayPort Alternate mode (DP Alt) or Thunderbolt 3 enabled computer
Requires USB power source of minimum 5V/900mA output (USB power cable included)
Package contents
Wireless USB-C Video Hub Extender (1 Transmitter + 1 Receiver)
USB 3.1 Type A to USB-C power cable
Quick Start Guide
Item Dimension (L inchxW inchxH inch)
5 x 1 x 3

1.00 lb

Warranty Information
2 Years

Weight 1.00 lbs







There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.