SIIG Accessory CE-H26W11-S1 1×8 HDMI Splitter HDbitT over IP Extender Kit 120m Brown Box


In stock

SKU: AS252029 Categories: ,


With a single Cat6 cable, you can easily extend HDMI audio/video signals up to 394ft (120m) with our 1×8 HDMI Splitter HDbitT over IP Extender Kit – 120m. Direct 1-to-1 connection, 1-to-Many through Gigabit network switches. Additional receivers, part# CE-H26U11-S1, are sold separately

Features cascade connection of up to 30 receivers per transmitter. 1-to-many configuration through 1) Unmanaged/Dedicated Gigabit switches, 2) Smart Gigabit switches with VLAN to segregate video traffic from the rest of the LAN. Many-to-many configuration is also supported via VLAN setups. Note that each VLAN can only accommodate 1 transmitter (TX). Note: We recommend using SIIG’s 24-port AV Over IP Smart Ethernet Switch, part# CE-SW0111-S1, sold separately

Delivers crystal clear Full HD content up to 1080p@60Hz resolution. Supports up to 1080p; supports 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz; Auto adjustment for different cable lengths to produce the best video/audio experience. Supports 2-channel Stereo Audio. * Note: There’s a 250ms or less delay/latency due to data compression. Not recommended for real-time applications, such as PC gaming

IR remote control through Cat6 cable allow source device to recognize remote commands; You can control the HDMI source device at a secondary location with the included IR cables that forward commands over a Cat6 cable for convenience. We recommend using high performance pure COPPER Cat6 cables to ensure reliable performance

High quality durable surface mountable metal housing with ventilation panels provides excellent heat dissipation and a higher level of RF/EMI shielding to ensure reliable performance and system stability during long hours of non-stop operation

Plug-n-Play installation, no software installation required, backed by a 2-year limited warranty

Note: Replaces CE-H25G11-S1
Transport protocol:
HDCP 1.2
Transmission distance:
Up to 394ft (120m) via single Cat6 cable at 1080p at 60Hz
Audio input:
7.1 channel, PCM, DTS, AC3
IR signal:
Unidirectional full frequency, 20KHz to 60KHz
Video resolution:
480p / 720p / 1080i / 1080p at 60Hz
Housing material:
Aluminum wall mount design
Network cable:
UTP/STP CAT6/6a/7 solid copper
Connection topology:
Direct connection: 1×8
Cascade connection: 1-to-many through dedicated IGMP Gigabit switches, up to 30 receivers per TX
Transmitter unit (TX):
1x 19-pin HDMI, Type A, Female, Input
1x 3.5mm jack, IR blaster, Output
8x 8-pin, RJ45, HDbitT signal, Output
1x Power jack, 5V/2A, Input
1x Reset button
Receiving unit (RX):
1x 19-pin HDMI, Type A, Female, Output
1x 3.5mm jack, IR receiver, Input
1x 8-pin, RJ45, HDbitT signal, Input
1x Power jack, 5V/1A, Input
1x Reset button
Power adapter:
100-240V / 50-60Hz
DC 5V/2A (1pc)
DC 5V/1A (8pcs)
UL listed: E335801 / Level:
Environmental conditions:
Operating temperature:
32 to 122 degrees FStorage temperature: 1
4 to 158 degrees FRelative humidity:
0 to 90% RH (non-condensing) Certifications/Standards:
Country of origin:
Item Dimension (L”xW”xH”)
7 x 19 x 11

11 lbs

Warranty Information
2 Years

Weight 11.00 lbs







There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.