Kingston Memory KF436C18RBA-32 32GB 3600MHz DDR4 CL18 DIMM FURY Renegade RGB

FURY KF436C18RBA/32 is a 4G x 64-bit (32GB) DDR4-3600 CL18 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0.

Each module has been tested to run at DDR4-3600 at a low latency timing of 18-22-22 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

FEATURES

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP = 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• On-Die termination (ODT)

• 16 internal banks; 4 groups of 4 banks each

• Bi-Directional Differential Data Strobe

• 8 bit pre-fetch

• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

• Height 1.66” (42.2mm), w/heatsink

FACTORY TIMING PARAMETERS

• Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V

• XMP Profile #1: DDR4-3600 CL18-22-22 @1.35V

• XMP Profile #2: DDR4-3000 CL16-18-18 @1.35V
CL(IDD)
17 cycles
Row Cycle Time (tRCmin)
45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
UL Rating
94 V – 0
Operating Temperature
0^o C to +70^o C
Storage Temperature
-40^o C to +85^o C
Item Dimension (L inchxW inchxH inch)
7 x 2 x 6

Weight
1.00 lb

Warranty Information
lifetime Manufacture Warranty