Synology Accessory E10M20-T1 M.2 Adapter and 10 Gigabit Ethernet Card

10GbE bandwidth and M.2 SSD cache, all at once

Synology E10M20-T1 helps you boost I/O performance and network bandwidth simultaneously using just one PCIe expansion slot on your Synology NAS.

10GbE ready

Achieve Multi-Gig Ethernet transmission speeds of up to 10 Gbps.

NVMe enabled

Accelerate random I/O performance with the dual M.2 2280/22110 NVMe SSD slots.

Dedicated cache slots

Free up primary drive bays for data storage.

A perfect match with Synology SNV3000 series NVMe SSD

Install Synology SNV3000 series NVMe SSD on the E10M20-T1 adapter card for fast and streamlined cache acceleration, and take full advantage of Synology SSD’s enterprise-grade endurance, performance, and reliability with your Synology NAS.
Hardware Specifications
General
Host Bus Interface
PCIe 3.0 x8
Bracket Height
Low Profile and Full Height
Operating Temperature
0^oC to 40^oC (32^oF to 104^oF)
Storage Temperature
-20^oC to 60^oC (-5^oF to 140^oF)
Relative Humidity
5% to 95% RH
Notes
The warranty period starts from the purchase date as stated on your purchase receipt.
Storage
Storage Interface
PCIe NVMe
Supported Form Factor
22110 / 2280
Connector Type and Quantity
M-key, 2 Slots
Network
IEEE Specification Compliance
IEEE 802.3an 10Gbps Ethernet
IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Flow Control
Data Transfer Rates
10 Gbps
Network Operation Mode
Full Duplex
Supported Features
9 KB Jumbo Frame
TCP/UDP/IP Checksum Offloading
Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s
Compatibility
Applied Models
NVMe SSD
SA series:SA3600, SA3400
20 series:RS820RP+, RS820+
19 series:DS2419+, DS1819+
18 series:RS2818RP+, DS3018xs, DS1618+